How To Paint Ghost Flames Video

How to Pigment Phantom Ghost Flames on Your Auto

by Jack Hathcoat

SONY DSC image by Tim Osborn from Fotolia.com

There are 2 approaches to painting ghost flames. The most popular is to select a colour that is close to the vehicle'south pigment job, lay out uniform paint stripes and mist the pigment into the flame area. This gives a very singled-out blueprint that may or may not achieve the look you lot want, particularly afterward pin-stripes are applied. A more "ghostly" approach is to use templates and freely spray paint directly onto the base coat where the colors tin can become blended. In the art world, the first approach is called the linear method whereas the 2nd is the painterly method.

Step ane

Decide which approach you will take in painting your ghost flames, either linear or painterly. If linear, mask off your flame design, creating symmetrical patterns on both sides which mirror one another. Either use templates or the pounce-purse method. For the pounce method, draw your flames on a big sheet of paper, perforate the drawing lines then strike the pounce-bag on the surface, getting chalk into the tiny holes. Be sure to flip the paper over for employ on the opposite side of the vehicle to create a mirror image. If you go with the painterly arroyo, respray the entire area to be flamed in a base of operations coat. No flame masking is required. Use flame templates to create flame edges with fades extending into the base color.

Step 2

Choose paints that are a similar hue and limit the color palette to no more than three values (slightly lighter or darker) to pigment a linear-manner ghost flame. The pin-stripe must also exist similar. Cull a wider range of colors for the painterly style but limit the colors to a thinned-down wash effect to go on them ethereal and ghostly. Lighten overly dark tones with a finish wash of transparent white and pearl. Utilize the flame templates to brand the flames overlap, twist and leap. They do non have to mirror from the left side to the right, but they must be balanced.

Spray the final finish on your flame job with clear glaze. Let it to cure fully before buffing. Pin-stripe the linear technique for the job to expect right. Practice not pivot-stripe with the painterly style.

References

Tips

Things You lot'll Need

Author Bio

Source: https://itstillruns.com/paint-phantom-ghost-flames-car-6875860.html

Posted by: thomasuncin1965.blogspot.com